Cara sambungan industrikonektor
Industrial konektors are also called konektors and plugs. Its function is to connect two active components and act as a current and signal transmission function. With the changes in the application environment, konektors wis entuk macem-macem cara koneksi, tujuane supaya luwih adaptasi karo lingkungan adegan lan njamin transmisi sinyal sing stabil.
1. Sambungan Utas
Iki minangka cara sambungan tradisional, lan migunani kanggo nggarap komponen sing luwih gedhe utawa ing lingkungan kanthi geter sing kuat. Kauntungan saka sambungan iki yaiku dipercaya nggunakake, lan kabel tetep nganggo gesekan kacang lan gir. Yen sampeyan nambah sekring kanggo nyegah loosening, efek kasebut bakal luwih apik. Kerugiane yaiku kacepetan pembubaran cukup alon, lan butuh listrik sakedhik kanggo narik benang, sing mbutuhake wektu akeh.
2. Sambungan Bayonet
Iki minangka formulir sambungan sing bisa nyambung lan nyopot kanthi cepet. Iki asring digunakake kanggo nyambungake rong komponen listrik sing gampang.Konektorthat are connected by a snap-in type will mark the correct snap-locking direction at the buckle. The user can observe whether the buckle is installed in the small hole on the side of the konektor nut.
3. Sambungan plug
The plug-in connection method is a commonly used connection method. The plug and socket of the konektor can be connected and separated by moving in the horizontal direction. No twisting and optional installation are required, and the connection can be completed in a short time. And separation. The common plug connection has two structures: ball and pin. This connection method saves the traditional mechanical locking mechanism, so once the konektor is inserted by mistake, it is very difficult to pull it out.
4. sambungan Kabinet
Iki adhedhasar cara sambungan listrik sing cedhak karo pigura lan kudu disambung kanthi wuta menyang peralatan kasebut. Nggunakake metode iki bisa nggawe peralatan listrik dadi entheng lan sithik. Saben unit bisa digunakake kanthi mandhiri, sing luwih gampang dijaga lan bisa dipercaya luwih dhuwur. Amarga operator mode sambungan iki ora bisa ndeleng koneksi, mesthine kudu ana piranti posisi sing akurat kanggo mbantu sambungan sing lancar. Biasane nggunakake kontak ngambang utawa desain spring kanggo mesthekake sambungan sing bener.
5. Sambungan solder
Soldering connection refers to the formation of continuous metal between the solder and the surface to be soldered. Therefore, the prerequisite for the konektor is to have solderability. The common plating on the soldering end of the konektor includes metals such as tin alloy, silver and gold. The reed type contact has the welding piece type, the punching welding piece type and the notched welding piece type for the common welding end: the pinhole contact has a drilling arc notch for the common welding end.
6. Nggawe sambungan
Sambungan tindikan uga diarani sambungan pamindahan insulasi. Iki nduweni ciri keandalan sing dhuwur, biaya murah, lan panggunaan sing trep. Wis digunakake ingkonektors in the printing industry. It is suitable for interconnection between ribbon cables. It is not necessary to puncture the insulation layer of the cable when connecting. The tip of the "U"-shaped contact spring of the konektor is used to pierce the insulation layer, so that the conductor of the cable slides into the concave groove of the konektor and is fixed, so that the cable and The konektorsana ing kontak cedhak.
